The BINA ENERGY By-Pass Tubing Clamp is designed for use with Electrical Submersible Pump (ESP) By-Pass Systems to clamp the By-Pass Tubing to the Pumps and Motors. The By-Pass Tubing Clamps constructed of cast steel in two halves for ease of fitting and is complete with a special clip to allow Motor Lead Extension (MLE) to be attached.

The Clamp is finished turned within a jig to suit the drift size of casing in which it is to be run.
  The By-Pass Tubing Clamp has the advantage over Neck Clamps in that it can be fitted anywhere on the Pump or Motor allowing more to be fitted and thus better centralizing the system.
  The Tubing Clamp is bolted together with studs and nuts at the required position.